* feat(gtasks): add Google Tasks bidirectional sync
Problem: pending.nvim only supported one-way push to Google Calendar.
Users who use Google Tasks had no way to sync tasks bidirectionally.
Solution: add `lua/pending/sync/gtasks.lua` backend with OAuth PKCE
auth, push/pull/sync actions, and field mapping between pending tasks
and Google Tasks (category↔tasklist, `priority`/`recur` via notes).
* refactor(cli): promote sync backends to top-level subcommands
Problem: `:Pending sync gtasks auth` required an extra `sync` keyword
that added no value and made the command unnecessarily verbose.
Solution: route `gtasks` and `gcal` as top-level `:Pending` subcommands
via `SYNC_BACKEND_SET` lookup. Tab completion introspects backend
modules for available actions instead of hardcoding `{ 'auth', 'sync' }`.
* docs(gtasks): document Google Tasks backend and CLI changes
Problem: vimdoc had no coverage for the gtasks backend and still
referenced the old `:Pending sync <backend>` command form.
Solution: add `:Pending-gtasks` and `:Pending-gcal` command sections
with per-action docs, update sync backend interface, and add gtasks
config example.
* ci: format
* refactor(config): remove legacy gcal top-level config key
Problem: the gcal migration shim silently accepted vim.g.pending = { gcal
= {...} } and copied it to sync.gcal, adding complexity and a deprecated
API surface.
Solution: remove the migration block in config.get(), drop the cfg.gcal
fallback in gcal_config(), delete the two migration tests, and clean up
the vimdoc references. Callers must now use sync.gcal directly.
* ci: fix
* fix(spec): remove duplicate buffer require in complete_spec
* docs(pending): reorganize vimdoc and fix incorrect defaults
Problem: sections were out of logical order — inline metadata appeared
before commands, GCal before its own backend framework, store resolution
duplicated and buried after health check. Two defaults were wrong:
default_category documented as 'Inbox' (should be 'Todo') and the gcal
calendar example used 'Tasks' (should be 'Pendings').
Solution: reorder all 21 sections into onboarding-first flow, add a
CONTENTS table with hyperlinks, fix both incorrect defaults in every
location they appeared, and remove the duplicate STORE RESOLUTION
section.
* feat(filter): wire F key and <Plug>(pending-filter) mapping
Problem: the filter predicate logic, diff guard, _on_write handling,
:Pending filter command, and filter_spec were already implemented, but
there was no buffer-local key to invoke filtering interactively.
Solution: add filter = 'F' to keymaps config and defaults, wire the
filter action in _setup_buf_mappings via vim.ui.input, add
<Plug>(pending-filter), and update the vimdoc (mappings table, Plug
section, config example, and FILTERS section).
* refactor(store): convert singleton to Store.new() factory
Problem: store.lua used module-level _data singleton, making
project-local stores impossible and creating hidden global state.
Solution: introduce Store metatable with all operations as instance
methods. M.new(path) constructs an instance; M.resolve_path()
searches upward for .pending.json and falls back to
config.get().data_path. Singleton module API is removed.
* refactor(diff): accept store instance as parameter
Problem: diff.apply called store singleton methods directly, coupling
it to global state and preventing use with project-local stores.
Solution: change signature to apply(lines, s, hidden_ids?) where s is
a pending.Store instance. All store operations now go through s.
* refactor(buffer): add set_store/store accessors, drop singleton dep
Problem: buffer.lua imported store directly and called singleton
methods, preventing it from working with per-project store instances.
Solution: add module-level _store, M.set_store(s), and M.store()
accessors. open() and render() use _store instead of the singleton.
init.lua will call buffer.set_store(s) before buffer.open().
* refactor(complete,health,sync,plugin): update callers to store instance API
Problem: complete.lua, health.lua, sync/gcal.lua, and plugin/pending.lua
all called singleton store methods directly.
Solution: complete.lua uses buffer.store() for category lookups;
health.lua uses store.new(store.resolve_path()) and reports the
resolved path; gcal.lua calls require('pending').store() for task
access; plugin tab-completion creates ephemeral store instances via
store.new(store.resolve_path()). Add 'init' to the subcommands list.
* feat(init): thread Store instance through init, add :Pending init
Problem: init.lua called singleton store methods throughout, and there
was no way to create a project-local .pending.json file.
Solution: add module-level _store and private get_store() that
lazy-constructs via store.new(store.resolve_path()). Add public
M.store() accessor used by specs and sync backends. M.open() calls
buffer.set_store(get_store()) before buffer.open(). All store
callsites converted to get_store():method(). goto_file() and
add_here() derive the data directory from get_store().path.
Add M.init() which creates .pending.json in cwd and dispatches from
M.command() as ':Pending init'.
* test: update all specs for Store instance API
Problem: every spec used the old singleton API (store.unload(),
store.load(), store.add(), etc.) and diff.apply(lines, hidden).
Solution: lower-level specs (store, diff, views, complete, file) use
s = store.new(path); s:load() directly. Higher-level specs (archive,
edit, filter, status, sync) reset package.loaded['pending'] in
before_each and use pending.store() to access the live instance.
diff.apply calls updated to diff.apply(lines, s, hidden_ids).
* docs(pending): document :Pending init and store resolution
Add *pending-store-resolution* section explaining upward .pending.json
discovery and fallback to the global data_path. Document :Pending init
under COMMANDS. Add a cross-reference from the data_path config field.
* ci: format
* ci: remove unused variable
* feat(config): add icons table with unicode defaults
* feat(buffer): render icon overlays from config.icons
Problem: status characters ([ ], [x], [!]) and metadata prefixes are
hardcoded literals with no user customization.
Solution: read config.icons in apply_extmarks and apply overlay
extmarks for checkboxes/headers, replace hardcoded recur ↺ with
icons.recur, and prefix due/category virt_text with configurable
icon characters.
* feat(plugin): add PendingTab command and <Plug>(pending-tab)
* docs: add icons config, PendingTab recipes, and demo infrastructure
Problem: icon customization and auto-start workflow are undocumented;
no demo asset exists for the README.
Solution: document pending.Icons in vimdoc with nerd font and ASCII
recipes, add PendingTab to commands and mappings, add open-on-startup
recipe, add demo-init.lua and demo.tape for VHS screenshot generation,
add assets/ directory, add README icons section and demo placeholder.
* ci: format
* feat(file-token): add file: inline metadata token with gf navigation
Problem: there was no way to link a task to a specific location in a
source file, or to quickly jump from a task to the relevant code.
Solution: add a file:<path>:<line> inline token that stores a relative
file reference in task._extra.file. Virtual text renders basename:line
in a new PendingFile highlight group. A buffer-local gf mapping
(configurable via keymaps.goto_file) opens the file at the given line.
M.add_here() lets users attach the current cursor position to any task
via vim.ui.select(). M.edit() gains -file support to clear the
reference. <Plug>(pending-goto-file) and <Plug>(pending-add-here) are
exposed for custom mappings.
* test(file-token): add parse, diff, views, edit, and navigation tests
Problem: the file: token implementation had no test coverage.
Solution: add spec/file_spec.lua covering parse.body extraction,
malformed token handling, duplicate token stop-parsing, diff
reconciliation (store/update/clear/round-trip), LineMeta population
in both views, :Pending edit -file, and goto_file notify paths for
no-file and unreadable-file cases. All 292 tests pass.
* style: apply stylua formatting
* fix(types): remove empty elseif block, fix file? annotation nullability
* feat(filter): oil-like editable filter line with predicate dispatch
Problem: no way to narrow the pending buffer to a subset of tasks
without manual scrolling; filtered-out tasks would be silently deleted
on :w because diff.apply() marks unseen IDs as deleted.
Solution: add a FILTER: line rendered at the top of the buffer when a
filter is active. The line is editable — :w re-parses it and updates
the hidden set. diff.apply() gains a hidden_ids param that prevents
filtered-out tasks from being marked deleted. Predicates: cat:X,
overdue, today, priority (space-separated AND). :Pending filter sets
it programmatically; :Pending filter clear removes it.
* ci: format
* refactor(sync): extract backend interface, adapt gcal module
Problem: :Pending sync hardcodes Google Calendar — M.sync() does
pcall(require, 'pending.sync.gcal') and calls gcal.sync() directly.
The config has a flat gcal field. This prevents adding new sync backends
without modifying init.lua.
Solution: Define a backend interface contract (name, auth, sync, health
fields), refactor :Pending sync to dispatch via require('pending.sync.'
.. backend_name), add sync table to config with legacy gcal migration,
rename gcal.authorize to gcal.auth, add gcal.health for checkhealth,
and add tab completion for backend names and actions.
* docs(sync): update vimdoc for backend interface
Problem: Vimdoc documents :Pending sync as a bare command that pushes
to Google Calendar, with no mention of backends or the sync table config.
Solution: Update :Pending sync section to show {backend} [{action}]
syntax with examples, add SYNC BACKENDS section documenting the interface
contract, update config example to use sync.gcal, document legacy gcal
migration, and update health check description.
* test(sync): add backend dispatch tests
Problem: No test coverage for sync dispatch logic, config migration,
or gcal module interface conformance.
Solution: Add spec/sync_spec.lua with tests for: bare sync errors,
empty backend errors, unknown backend errors, unknown action errors,
default-to-sync routing, explicit sync/auth routing, legacy gcal config
migration, explicit sync.gcal precedence, and gcal module interface
fields (name, auth, sync, health).
* feat: :Pending edit command for CLI metadata editing
Problem: editing task metadata (due date, category, priority,
recurrence) requires opening the buffer and editing inline. No way
to make quick metadata changes from the command line.
Solution: add :Pending edit {id} [operations...] command that applies
metadata changes by numeric task ID. Supports due:<date>, cat:<name>,
rec:<pattern>, +!, -!, -due, -cat, -rec operations with full date
vocabulary and recurrence validation. Pushes to undo stack, re-renders
the buffer if open, and provides feedback messages. Tab completion for
IDs, field names, date vocabulary, categories, and recurrence patterns.
Also fixes store.update() to properly clear fields set to vim.NIL.
* ci: formt
* feat: text objects and motions for the pending buffer
Problem: the pending buffer has action-button mappings but no Vim
grammar. You cannot dat to delete a task, cit to change a description,
or ]] to jump to the next category header.
Solution: add textobj.lua with at/it (a task / inner task), aC/iC
(a category / inner category), ]]/[[ (next/prev header), and ]t/[t
(next/prev task). All text objects work in operator-pending and visual
modes; motions work in normal, visual, and operator-pending. Mappings
are configurable via the keymaps table and exposed as <Plug> mappings.
* fix(textobj): escape Lua pattern hyphen, fix test expectations
Problem: inner_task_range used unescaped '-' in Lua patterns, which
acts as a lazy quantifier instead of matching a literal hyphen. The
metadata-stripping logic also tokenized the full line including the
prefix, so the rebuilt string could never be found after the prefix.
All test column expectations were off by one.
Solution: escape hyphens with %-, rewrite metadata stripping to
tokenize only the description portion after the prefix, and correct
all test assertions to match actual rendered column positions.
* feat(textobj): add debug mode, rename priority view buffer
Problem: the ]] motion reportedly lands one line past the header in
some environments, and ]t/[t may not override Neovim defaults. No
way to diagnose these at runtime. Also, pending://priority is a poor
buffer name for the flat ranked view.
Solution: add a debug config option (vim.g.pending = { debug = true })
that logs meta state, cursor positions, and mapping registration to
:messages at DEBUG level. Rename the buffer from pending://priority to
pending://queue. Internal view identifier stays 'priority'.
* docs: text objects, motions, debug mode, queue view rename
Problem: vimdoc had no documentation for the new text objects, motions,
debug config, or the pending://queue buffer rename.
Solution: add text object and motion tables to the mappings section,
document all eight <Plug> mappings, add debug field to the config
reference, update config example with new keymap defaults, rename
priority view references to queue throughout the vimdoc.
* fix(textobj): use correct config variable, raise log level
Problem: motion keymaps (]], [[, ]t, [t) were never set because
`config.get().debug` referenced an undefined `config` variable,
crashing _setup_buf_mappings before the motion loop. Debug logging
also used vim.log.levels.DEBUG which is filtered by default.
Solution: replace `config` with `cfg` (already in scope) and raise
both debug notify calls from DEBUG to INFO.
* ci: formt
Problem: :Pending|only failed because the command definition lacked the
bar attribute, causing | to be consumed as an argument.
Solution: Add bar = true to nvim_create_user_command so | is treated as
a command separator, matching fugitive's :Git behavior.
* feat(config): add recur_syntax and someday_date fields
Problem: the plugin needs configuration for the recurrence token name
and the sentinel date used by the `later`/`someday` named dates.
Solution: add `recur_syntax` (default 'rec') and `someday_date`
(default '9999-12-30') to pending.Config and the defaults table.
* feat(parse): expand date vocabulary with named dates
Problem: the date input only supports today, tomorrow, +Nd, and
weekday names, lacking relative offsets like weeks/months, period
boundaries, ordinals, month names, and backdating.
Solution: add yesterday, eod, sow/eow, som/eom, soq/eoq, soy/eoy,
+Nw, +Nm, -Nd, -Nw, ordinals (1st-31st), month names (jan-dec),
and later/someday to resolve_date(). Add tests for all new tokens.
* feat(recur): add recurrence parsing and next-date computation
Problem: the plugin has no concept of recurring tasks, which is
needed for habits and repeating deadlines.
Solution: add recur.lua with parse(), validate(), next_due(),
to_rrule(), and shorthand_list(). Supports named shorthands (daily,
weekdays, weekly, etc.), interval notation (Nd, Nw, Nm, Ny), raw
RRULE passthrough, and ! prefix for completion-based mode. Includes
day-clamping for month/year advancement.
* feat(store): add recur and recur_mode task fields
Problem: the task schema has no fields for storing recurrence rules.
Solution: add recur and recur_mode to the Task class, known_fields,
task_to_table, table_to_task, and the add() signature.
* feat(parse): add rec: inline token parsing
Problem: the buffer parser does not recognize recurrence tokens,
so users cannot set recurrence rules inline.
Solution: add recur_key() helper and rec: token parsing in body()
and command_add(), with ! prefix handling for completion-based mode
and validation via recur.validate().
* feat(diff): propagate recurrence through buffer reconciliation
Problem: the diff layer does not extract or apply recurrence fields,
so rec: tokens written in the buffer are silently ignored on :w.
Solution: add rec and rec_mode to ParsedEntry, extract them in
parse_buffer(), and pass them through create and update paths in
apply().
* feat(init): spawn next task on recurring task completion
Problem: completing a recurring task does not create the next
occurrence, and :Pending add does not pass recurrence fields.
Solution: in toggle_complete(), detect recurrence and spawn a new
pending task with the next due date. Wire rec/rec_mode through the
add() command path.
* feat(views): add recurrence to LineMeta
Problem: LineMeta does not carry recurrence info, so the buffer
layer cannot display recurrence indicators.
Solution: add recur field to LineMeta and populate it in both
category_view() and priority_view().
* feat(buffer): add PendingRecur highlight and recurrence virtual text
Problem: recurring tasks have no visual indicator in the buffer,
and the extmark logic uses a rigid if/elseif chain that does not
compose well with additional virtual text fields.
Solution: add PendingRecur highlight group linking to DiagnosticInfo.
Refactor apply_extmarks() to build virtual text parts dynamically,
appending category, recurrence indicator, and due date as separate
composable segments. Set omnifunc on the pending buffer.
* feat(complete): add omnifunc for cat:, due:, and rec: tokens
Problem: the pending buffer has no completion source, requiring
users to type metadata tokens from memory.
Solution: add complete.lua with an omnifunc that completes cat:
tokens from existing categories, due: tokens from the named date
vocabulary, and rec: tokens from recurrence shorthands.
* docs: document recurrence, expanded dates, omnifunc, new config
Problem: the vimdoc does not cover recurrence, expanded date syntax,
omnifunc completion, or the new config fields.
Solution: add DATE INPUT and RECURRENCE sections, update INLINE
METADATA, COMMANDS, CONFIGURATION, HIGHLIGHT GROUPS, HEALTH CHECK,
and DATA FORMAT. Expand the help popup with recurrence patterns and
new date tokens. Add recurrence validation to healthcheck.
* ci: fix
* fix(recur): resolve LuaLS type errors
Problem: LuaLS reported undefined-field for `_raw` on RecurSpec and
param-type-mismatch for `last_day.day` in `advance_date` because
`osdate.day` infers as `string|integer`.
Solution: Add `_raw` to the RecurSpec class annotation and cast
`last_day.day` to integer in both `math.min` call sites.
* refactor(init): remove help popup, use config-driven keymaps
Problem: Buffer-local keymaps were hardcoded with no way for users to
customize them. The g? help popup duplicated information already in the
vimdoc.
Solution: Remove show_help() and the g? mapping. Refactor
_setup_buf_mappings to read from cfg.keymaps, letting users override or
disable any buffer-local binding via vim.g.pending.
* feat(config): add keymaps table for buffer-local bindings
Problem: Users had no way to customize or disable buffer-local key
bindings in the pending buffer.
Solution: Add a pending.Keymaps class and keymaps field to
pending.Config with defaults for all eight buffer actions. Setting any
key to false disables that binding.
* feat(plugin): add Plug mappings for all buffer actions
Problem: Only five of nine buffer actions had <Plug> mappings, so users
could not bind close, undo, open-line, or open-line-above globally.
Solution: Add <Plug>(pending-close), <Plug>(pending-undo),
<Plug>(pending-open-line), and <Plug>(pending-open-line-above).
* docs: update mappings and config for keymaps and new Plug entries
Problem: Vimdoc still listed g? help popup, lacked documentation for
the four new <Plug> mappings, and had no keymaps config section.
Solution: Remove g? from mappings table, document all nine <Plug>
mappings, add keymaps table to the config example and field reference,
and note that buffer-local keys are configurable.
* refactor(config): change default category from Inbox to Todo
* refactor(views): adopt markdown checkbox line format
Problem: task lines used an opaque /ID/ [N] prefix format that was
hard to read and inconsistent between category and priority views.
Header lines had no visual marker distinguishing them from tasks.
Solution: render headers as '## Cat', task lines as
'/ID/- [x|!| ] description'. State encoding: [x]=done, [!]=urgent,
[ ]=pending. Both views use the same construction.
* refactor(diff): parse and reconcile markdown checkbox format
Problem: parse_buffer matched the old ' text' indent pattern and
detected headers via '^%S'. Priority was read from a '[N] ' prefix.
apply() never reconciled status changes written into the buffer.
Solution: match '- [.] text' for tasks and '^## ' for headers.
Extract state char to derive priority (! -> 1) and status (x -> done).
apply() now reconciles status from the buffer, setting/clearing 'end'
timestamps — enabling the oil-style edit-checkbox-then-:w workflow.
* refactor(buffer): update syntax, extmarks, and render for checkbox format
Problem: syntax patterns matched the old indent/[N] format; right_align
virtual text produced a broken layout in narrow windows; the done
strikethrough skipped past the ' ' indent leaving '- [x] ' unstyled;
render() added undo history entries so 'u' could undo a re-render.
Solution: update taskHeader/taskLine patterns for '## '/'- [.]'; rename
taskPriority -> taskCheckbox matching '[!]'; switch virt_text_pos to
'eol'; drop the +2 col_start offset so strikethrough covers '- [x] ';
guard nvim_buf_set_lines with undolevels=-1 so renders are not undoable.
Also fix open_line to insert '- [ ] ' and position cursor at col 6.
* refactor(init): replace multi-level priority with binary toggle
Problem: <C-a>/<C-x> overrode Vim's native number increment and the
visual g<C-a>/g<C-x> variants added complexity for marginal value.
toggle_complete() left the cursor on the wrong line after re-render.
Solution: remove change_priority/change_priority_visual; add
toggle_priority() (0<->1) mapped to '!', with cursor-follow after
render matching the pattern already used in priority toggle. Add
cursor-follow to toggle_complete() for the same reason. Update plugin
plugs (priority-up/down -> priority) and add 'due'/'undo' to the
:Pending completion list. Update help text accordingly.
* feat(buffer): reflect current view in buffer name
Problem: no way to tell at a glance which view (category vs priority)
is active — the buffer was always named 'pending://'.
Solution: update the buffer name to 'pending://category' or
'pending://priority' on every render, so the view is visible in
the statusline/tabline without any extra UI.
Problem: priority was binary (0 or 1), toggled with !, with no way
to express finer gradations or use Vim's native increment idiom.
Solution: replace toggle_priority with change_priority(delta) which
clamps to floor 0. Display format changes from '! ' to '[N] ' so any
integer level is representable. Parser updated to extract numeric
level from the [N] prefix. Visual g<C-a>/g<C-x> apply the delta to
all tasks in the selection. <Plug>(pending-priority) replaced with
<Plug>(pending-priority-up) and <Plug>(pending-priority-down).
